Managing report files
ADM003GVAE1005 217
“Do Selected” option to automate run file generation
“Make” option to automate run file generation
“Build All” option to automate run file generation
Note! The “Build All” generation
process does not prompt the user
if the report is not in the report
Index. You must use the Master
menu to add reports to the index.
The Build All option is useful for either initial project development or if the system
database has been modified. System database modification often requires re-
verification of database references.
Deleting reports
Deleting generated reports
This action deletes the report from the Report Index. Once deleted, it cannot be
viewed or printed in the Operate program.
Deleting saved reports
This action totally deletes the report. This process cannot be reversed once the RPT file is deleted.
Step-by-Step
• Click Do Selected. A dialog box appears asking you to confirm your request
to compile all selected files
• Click OK to proceed with the compilation of the files you have selected
Step-by-Step
• Click Make. A dialog box appears asking you to confirm your request to
compile all altered files
• Click OK. This option generates all files that have changed since last
generated. This option is useful if you are unsure of which files have been
modified
Step-by-Step
• Click Build All. A dialog box appears asking you to confirm your request to
compile all files
• Click OK. This option unconditionally compiles all files for a project, even if
they have not changed since the last generation
Step-by-Step
• Select File and click Report Index
• Select the desired report to be deleted
• Click Delete
Step-by-Step
• Open explorer in Windows
• Select the drive that contains the FuelsManager directory and then locate
the Reports directory
• Delete the report with the .RPT and .RRT file extensions
To Next Page
Loading...