ATD2 10511 - Flow Calculations; Flow; Level Rate; Mass Flow

FuelsManager Defense
318 Administrator Manual
Flow calculations
The following sections detail how FuelsManager performs Flow calculations.
Flow
Where:
Level rate
Where:
Mass flow
Where:
Q = Flow rate
GOVn+1-
GOVn
= Gross Volume change in the sampling cycle
Tn+1, Tn = Sample times
Q = =Flow rate
Leveln+1-
Leveln
= Level change in the sampling cycle
Tn+1, Tn = Sample times
Q = Flow rate
WNn+1-
WNn
= Weight change in the sampling cycle
Tn+1, Tn = Sample times