ATD2 10511 - Creating Values in a Dynamic Report; Creating Totals and Averages

FuelsManager Defense
210 Administrator Manual
Creating values in a dynamic report
When creating a value for a Dynamic report, only individual points are used. The
process involves selecting a default database, selecting the point, and then
selecting the corresponding point variable. All types of points can be used in a
Dynamic Report Input, Output, Triggered, and Tank points.
Creating totals and averages
After all values have been inserted, you have the option of displaying totals or
averages at the bottom of a column or at the end of a row. The user is able to
insert multiple column averages and totals; however, total or averages cannot be
used outside of a table.
Step-by-Step
• Select Edit, click Add, and click Value
• Click where you want the value to be displayed. This can be within a table or
not
• Select a point from the Database Edit dialog box to be represented by the
value
• Click Select. The Select Database Point dialog box appears
• Make appropriate selections and click OK. The Select Engineering Units
dialog box appears if the point variable is numerical. For a complete list of
engineering units, refer to the Glossary
• The Database Value Attributes dialog box appears
• Click OK when the appearance, formatting, and positioning of the value
have been completed. The value appears in the selected area or cell
Step-by-Step
• Select Edit, click Add, and click Summary
• Click on the cell where you want the total to be displayed. The insertion can
exist in any cell at the end of a row, column, or any cell in-between as long
as there are cells to total or average. The Row/Column Summary dialog box
appears
• Click either the Column Summary or the Row Summary option button to
select a row or a column summary. Click either Calculate Total or Calculate
Average option button
• Type the number of cells to include in the summation or average. This
number includes the cells to the left in a row or the number of cells above
the insertion point. Entering this number allows for more than one total
average to display. The number excludes the cell containing the total or
average
• Click OK
• A value appears in the selected cell