FuelsManager Defense
194 Administrator Manual
Using “Do Selected” command
Using “Make” command
Note! This generation process
does not prompt the user if the
graphic is not in the Graphic Index.
You must use the Master menu to
add graphics to the index.
Using “Build All” command
Viewing file groups
The Master menu provides the user ability to view all created graphics, symbols,
and conditions. From each menu option, the contents can be deleted and the
name can be changed. These indexes are described below:
The graphic index
The Graphic Index defines all of the generated graphics that can be displayed in
the Operate program. Once you create a graphic, you can assign it to one of three
states:
• Pre-loaded: Graphic is loaded by Operate into your computer’s memory on
system startup.
• Not Pre-loaded: Graphic is not loaded into memory on startup but only when
selected.
• Not in Index: Graphic does not appear in the index.
The symbol index
The Symbol Index defines all of the symbols available to graphics.
Step-by-Step
• Click the Do Selected command. A dialog box appears asking you to
confirm your request to compile all selected files.
• Click OK to proceed with the compilation of the files you have selected.
Step-by-Step
• Click Make command. A dialog box appears asking you to confirm your
request to compile all altered files.
• Click OK. This option generates all files that have changed since last
generated. This option is useful if you are unsure of which files have been
modified.
Step-by-Step
• The Build All option is useful for either initial project development or if the
system database has been modified. System database modification often
requires re-verification of database references.
• Click Build All. A dialog box appears asking you to confirm your request to
compile all files.
• Click OK. This option unconditionally compiles all files for a project, even if
they have not changed since the last generation.
To Next Page
Loading...