ATD2 10511 - Report; Opening Report; Exiting Report; Pre-Defined Standard Reports

FuelsManager Defense
198 Administrator Manual
Report
Note! The Report feature is only
available in the FuelsManager
Professional Edition or the
FuelsManager Server Edition. The
FuelsManager Standard Edition
will not allow access to this feature.
For additional information about
upgrading to the FuelsManager
Professional Edition or the
FuelsManager Server Edition,
please contact your Varec
representative.
The Report application lets you create and edit reports as well as specify print
times and print intervals. Once created, the reports can be opened in the Operate
program. The active report prints at its scheduled time, even if the Operate
program is not opened.
In Operate, opened reports displaying real-time data from the database you
selected can be printed on-demand or schedule them to print automatically.
You can create two types of reports:
• The Summary report - displays the only Tank point information found in one or
more databases
• The Dynamic report - displays all types of points: Tank, Input, Output, and
Triggered points as defined by the report creator
Make sure the DataManager is not in SHUTDOWN mode. The user will not be
able to access the database dialog boxes used to define values if the
DataManager is in SHUTDOWN mode. The DataManager must be in STANDBY
or ACTIVE mode.
Opening Report
Exiting Report
Pre-defined standard reports
FuelsManager has provided several defined reports used to display standard tank
information that reflect common facility needs. These can be edited to conform to
the facility or used as a guideline.
Note! All of FuelsManager’s
standard reports are Summary
reports.
These reports include the Inactive Tank, Active Tank, Operating Tank, and Current
Tank Inventory reports. These standard reports are listed and described below:.
Step-by-Step
• From FuelsManager Configuration, User Interface menu select the Create
Reports command
• The Report Editor dialog box appears
Step-by-Step
• From the Report Editor dialog box, click File
•Select Exit
Standard Report Description
Inactive Tank Report Displays information about all inactive tanks in the
system.
Active Tank Report Displays information about all active tanks in the
system.
Operating Tank Report Lists all tanks known to the system.