Audit
ADM003GVAE1005 47
Audit
The FuelsManager audit feature allows the administrator to track when and by
whom configuration changes are made. Once enabled, changes made to the
audited parameters are logged to the Windows Event log under a FuelsManager
specific log called FM Audit. The audit log is useful in tracking down what
parameters have been changed when diagnosing a problem. FuelsManager
provides the ability to turn audit logging on and off for six areas of configuration
data.
Note! It is recommended that the
audit log only be enabled after
FuelsManager configuration is
complete. Enabling this feature
during configuration will result in
many useless log entries.
Reviewing the Event Log
Step-By-Step
• Open the Windows Control Panel from the Settings menu
• Select Administrative Tools
• Select Computer Management
• Click on the + next to System Tools to expand the tree structure
• Select Event Viewer
• Select FM Audit
Audit Categories
CHANGES TO TAG
CONFIGURATION
Monitor and record any changes made to the
configurations of any tag
CHANGES TO GROUP
PERMISSIONS
Monitor and record any changes made to the
permissions of any group
CHANGES TO USERS Monitor and record any changes made to the list
of Users
CHANGES TO GROUPS Monitor and record any changes made to the list
of Groups
CHANGES TO W&M
CALIBRATION SEALS
Monitor and record any changes made to the
W&M Calibration Seals
CHANGES TO W&M
MODULE SEALS
Monitor and record any changes made to the
W&M Module Seals
To Next Page
Loading...