Leak Detection
ADM003GVAE1005 253
Tank Analysis Methods
There are three possible tank analysis methods that can be used in
FuelsManager. All three methods compare test readings at different times to
calculate leak analyses.
Note! For more information on
Process Variables, see the
Database and Glossary sections of
this manual
Tank Analysis
Method
Description
Net Volume The Net Volume method collects net volume readings from
the tank when performing tests. This method uses up to four
decimal places in its VCF calculations, which is an API
standard
Unrounded Net
Volume
The Unrounded Net Volume method collects net volume
readings from the tank when performing tests. This method
uses up to 15 decimal places in its VCF calculations, which
provides a more accurate reading
Barton Series The Barton Series method collects pressure readings from
the tank when performing tests. FuelsManager retrieves the
pressure from a device that must be mapped to the Vapor
Press P3 process variable
To Next Page
Loading...