Assigning data sources
ADM003GVAE1005 131
Opening the Database IO Connections dialog box
Note! For a description of the
Database IO Connections refer to
the table below.
Note! The Select Data Source
dialog may also be opened directly
from the Input, Output, Trigger or
Tank Point edit dialog.
Select Data Source
dialog box
CONNECTION
TYPES
This option buttons allows filtering of the types of
connections displayed on the Database Point list.
• None - displays all unassigned connections
• Manual - displays all manual data source assignments
• Calc - displays all calculated data source assignments
• Comm - displays all CommManager data source
assignments
• OPC - displays all OPC Server data source
assignments
SELECT
SOURCE
BUTTON
The Select Source button allows a data source to be
assigned to a database point. Clicking on this button
displays the Select Data Source dialog box, and is only
enabled when a Database Point has been selected.
REFRESH The Refresh button the Database Point to be renewed
based on the current options selected in the Selected Point
Type and Connection Types options.
Database IO Connections dialog box
Step-by-Step
• Open FuelsManager Configuration
• From the Database menu select the Source Assignments command
• The Database IO Connections dialog box appears
• Select and then double click any database point shown
• The Select Data Source dialog box appears
To Next Page
Loading...