FuelsManager Defense
238 Administrator Manual
Exporting & Importing Movement Elements
You can export movements from FuelsManager to a file, and import that file to
another FuelsManager with the Movement Import/Export feature. You import and
export the tank nodes, unit nodes, meter nodes, movements, and groups
separately.
Note! All nodes must exist in the
workstation before you import
movements. If you are transferring
all elements of the movement
system (tank nodes, unit nodes,
meter nodes, movements, and
groups), import the tank, unit, and
meter nodes before the
movements.
Exporting Tank, Unit, and Meter Nodes; Movements; or
Groups
You must export tank, unit, and meter nodes or movements separately. However,
you use the same process for each of them.
Importing Tank, Unit, and Meter Nodes; Movements; or
Groups
You must import tank, unit, and meter nodes or movements separately. However,
you use the same process for each of them.
Step by Step
• From the Movements dialog box, click Export. The Import/Export File Types
dialog box appears
• Select either Tanks, Units, Meters, Movements, or Groups and click OK. A
dialog box appears, asking for the filename and location for the export
• Select the directory for the export, enter the file name, and click Save. The
system saves the selected movement information to the file
Step by Step
• Select Movements from the Configuration menu bar. The Movements dialog
box appears
• From the Movements dialog box, click Import. The Import/Export File Types
dialog box appears
• Select either Tanks, Units, Meters, Movements, or Groups and click OK
• Select the directory for the export, enter the import file name, and click
Open. The system imports the Tank nodes, Unit nodes, Movements, or
Groups from the file
To Next Page
Loading...