ATD2 10511 - Tank Points - Process Data

Tank Points - Process Data
ADM003GVAE1005 343
Tank Points - Process Data
Tank Points - Process Data
DESCRIPTION - POINT DESCRIPTION
This process variable is the name by which the tank is known to the user. This variable is entered when
configuring the tank point, but cannot be modified via Operate
PRODUCT - PRODUCT
This process variable is the type of product contained in the tank. This variable is entered when configuring the
tank point, but can be viewed or modified from Operate by a user with sufficient privileges. The product variable
contains a string that is the combination of the 20 character Product Code and the 30 character Product
Description
PRODUCT CODE - PRODUCT CODE
This variable is the product code part of the Product process variable
PRODUCT DESCRIPTION - PRODUCT DESCRIPTION
This variable is the product description part of the Product process variable
LEVEL - TANK LEVEL
This process variable is the current level of the tank; this variable is usually measured by automatic tank
gauging but can be manually entered by the operator
LEVEL TIME - TIME OF LAST LEVEL UPDATE
This process variable is the last time that the tank level was updated. This variable can be viewed from the
Operate interface but cannot be modified.
TEMPERATURE - TANK TEMPERATURE
This process variable is the current temperature of the tank; this variable is usually measured by automatic tank
gauging but can be manually entered by the operator
TEMPERATURE TIME - TIME OF LAST TEMP. UPDATE
This process variable is the last time that the tank temperature was updated. This variable can be viewed from
the Operate interface but cannot be modified
DENSITY - PRODUCT DENSITY
This process variable is the current observed density of the product at the current temperature, this variable can
be measured by automatic tank gauging, manually entered by the operator or calculated by FuelsManager from
the Std., Density and current temperature
DENSITY TIME - TIME OF LAST DENSITY UPDATE
This process variable is the last time that the Density value was updated. This variable can be viewed from the
Operate interface but cannot be modified
WATER LEVEL - WATER BOTTOM LEVEL