Definitions
ADM003GVAE1005 225
Definitions
This guide uses the following terms when explaining how to configure the
Movement System.
Movement summary
Unit – The movement system allows the creation of Source/Destination
designations called units, examples could be Pipeline XYZ, Truck Rack 123,
Pumphouse A2B. Units allow the operator to use meaningful names for plant
items being utilized for product movements. A unit has no measuring device so it
has no way of monitoring product movement, users cannot enter movement
setpoints for a unit and movements involving units will not calculate discrepancies.
Meter Node – A location in a product movement instance where a reading from a
physical meter is possible. You can associate FuelsManager input and output
database points with meter nodes and have the meter data automatically
collected or manually entered.
To Next Page
Loading...