FuelsManager Defense
18 Administrator Manual
Additional Configuration
Once a new install is completed, the Administrator must then configure the
database and security for the following items
• Confirm system and network setup
• Configure the database: Create and define Tank, Input, Output, and Triggered
points, assigning alarms to database points
• Define system resources such as products, tank sizes, and string names
• Create connections between the database and field devices
• Configure communications interfaces and field devices
• Create graphics to be displayed in Operate
• Create reports to be displayed in Operate and printed to hard copy
• Configure security: Define Users and assign to Groups, create and assign
Alarms and Tag
To Next Page