FuelsManager Defense
8 Administrator Manual
Step-by-Step
• Insert the Install CD-ROM into the CD-ROM drive
• If the CD does not autorun, perform the following:
From the Windows 2000/XP desktop, click the Start menu and select Run.
Type ‘E:\SETUP ‘(substitute the “E” with the appropriate CD drive letter)
• The Install Wizard will start, and a message appears regarding the need to
obtain a new hardware key, for this version of FuelsManager to function. If
you have a new hardware key, click OK
• Another message appears regarding the USB key type. If your key is USB,
remove the key from the port and click OK
• The Welcome Screen will appear, select Next
• The License Agreement will appear. Review text, then select the appropriate
option
• The Customer Information screen will appear. Review information and
change if appropriate
• For the “Install this application for…” option, make sure the ‘radio button’
next to the “Anyone…(All Users)” is selected, select Next
• The Setup Type screen appears, providing “Complete” or “Custom”
installation options. Leave the selection set to “Complete,” select Next
• The wizard confirms that you are now ready to set Program Options. Click
Next
• The next screen prompts you to enter the default units FuelsManager will
use for adding new tank points. Select either English (FT-IN-16) or Metric
and click Next
• The next screen prompts you to select the language the software will use.
Select from the list and click Next
• The next screen prompts you to select the database type you will be using.
Select either Microsoft Access or Microsoft SQL Server and click Next
• The next screen asks if you want to install the demo database. Selected the
required option and click Next
• The wizard confirms that it is ready to begin installation. Click Install
• The install wizard begins to install FuelsManager Defense. This may take
several minutes to complete
• After completion, the Installation Wizard Complete screen appears. Click
Finish
• The wizard will close and give the option to restart your system. Click Yes if
you want to restart at this time. If using a USB key, you can insert the key
after rebooting
To Next Page