Tank Points - Process Data
ADM003GVAE1005 351
LIQUID MASS
This process variable is the mass of the liquid of the product in the tank. FuelsManager normally calculates this
value. However, the value can also be measured by automatic tank gauging systems or manually entered
TOTAL NET VOLUME
This process variable is the total net volume of the product in the tank. FuelsManager normally calculates this
value. However, the value can also be measured by automatic tank gauging systems or manually entered
FASTSCAN COMMAND
This process variable allows the operator to choose the timing of the communications for a particular gauge. The
possible values are enabled or disabled. When enabled the timing is dependent of the type of gauge
FASTSCAN STATUS
This process variable displays the current FASTSCAN status (gauge communications) either enabled or
disabled
Tank Points - Process Data
To Next Page
Loading...