Product Transfer Data
ADM003GVAE1005 353
TRANSFER MASS - CURRENT MASS TRANSFERRED
This variable is the amount of mass transferred into or out of a tank during the tank transfer, or the amount
transferred thus far if a transfer is active
TRANSFER TIME REMAIN - REMAINING TIME TO FILL OR EMPTY
This variable is the time left to complete an active transfer, based on the amount left to transfer, and the current
flow rate
TRANSFER START TIME - TIME AT WHICH TRANSFER BEGAN
This variable is the time at which a currently active transfer started. If no transfer is active this variable displays
the time that the last transfer was started
TRANSFER COMPLETE TIME - TRANSFER FINISH TIME
This variable is the time at which a last product transfer ended
TRANSFER LEVEL SETPOINT - TRANSFER LEVEL SETPOINT
This variable is the current level shutdown setpoint. If no transfer is active this variable displays the level
shutdown setpoint for the last transfer
TRANSFER VOL SETPOINT - TRANSFER FINAL VOLUME SP
This variable is the current volume shutdown setpoint. If no transfer is active this variable displays the volume
shutdown setpoint for the last transfer
TRANSFER DIFF VOL SP - TRANSFER DIFF. VOLUME SP
This variable is the current differential volume shutdown setpoint. If no transfer is active this variable displays
the differential volume shutdown setpoint for the last transfer
TRANSFER MASS SETPOINT - TRANSFER MASS SETPOINT
This variable is the current mass shutdown setpoint. If no transfer is active this variable displays the mass
shutdown setpoint for the last transfer
TRANSFER DIFF MASS SP - TRANSFER DIFF. MASS SP
This variable is the current differential mass shutdown setpoint. If no transfer is active this variable displays the
differential mass shutdown setpoint for the last transfer
TRANSFER REMAINING - TRANSFER REMAINING BASED ON MODE
This variable is the amount of product that remains to be transferred for the currently active transfer. Units are
based on the currently selected transfer mode
MASS TRANSFER REM - TRANSFER REMAINING MASS
This variable is the amount of product, expressed in mass units, that remains to be transferred for the currently
active transfer
Product Transfer Data
To Next Page
Loading...