Variable Value
• seconds—from 10–4294967295
• minutes—from 1–71582788
•
hours—from 1–1193046
• days—from 1–49710
• weeks—from 1–7101
Important:
When you change the IP address or subnet mask, connectivity to Telnet and the Web can
be lost.
default ip dhcp client lease command
The default ip dhcp client lease command configures the DHCP client lease time
(seconds, minutes, hours, days, and weeks) to default values.
The syntax for the default ip dhcp client lease command is
default ip dhcp client lease
Run the default ip dhcp client lease command in Global Configuration command
mode.
Important:
When you change the IP address or subnet mask, connectivity to
Telnet and the Web can
be lost.
no ip dhcp client lease command
The no ip dhcp client lease command deletes the DHCP client lease time.
The syntax for the no ip dhcp client lease command is
no ip dhcp client lease
Run the no ip dhcp client lease command in Global Configuration command mode.
show ip dhcp client lease command
The show ip dhcp client lease command displays the configured and granted DHCP
client lease time.
General switch administration using ACLI
Configuration — System April 2011 135
To Next Page
Loading...
