PRODUCT REFERENCE GUIDE
159
First, Enable Send All Multiple Read Labels:
Next, define a Multiple Label Separator (Standard Formatter):
Next, define a Multiple Label Separator (Advanced Formatter), if Advanced Formatter is used:
Partial Read Is Treated As
When an application is set to read two or more bar codes in a trigger cycle, there are certain
decisions that the application software needs to make. In an example where two bar codes are
enabled and only one of the two codes are read the customer can choose to:
Send only the single bar code that was read to the host
Only send bar code data if both bar codes are read.
This defines a Partial read condition. If only one of the two bar codes are read the following
option can be selected:
•
No Read – if only one of the two codes are read transmit a No Read
•
Good Read – if only one of the two codes are read transmit that read data
•
Partial Read - A Partial Read is a condition when multiple barcodes are enabled, but not
all barcodes are read during a trigger cycle.
Multi-Filter Settings
Strip Filter
Select the check box to display the Strip Filter Settings options. This is a second level filter
that when enabled allows eliminating characters not managed by the host.
To Next Page
Loading...
Need help?
General
