AV7000 DEVICE SETTINGS
PRODUCT REFERENCE GUIDE
225
AV7000 DEVICE SETTINGS
Use the Device Settings during initial setup to configure device specific settings. If nec-
essary, you can later make modifications to the device settings using the same menu
selections, including:
“Modify Settings | Device Settings | <Camera Name> | Device Info” on page 226
“Modify Settings | Device Settings | <Camera Name> | Mounting” on page 228
“Automated Mounting Calibration” on page 230
If there are reasons that the automated process does not work, Please use the manual
process documented at the link below.
“Manual Mounting Calibration” on page 240
“Modify Settings | Device Settings | <Camera name> | Imaging” on page 258
“Device Settings | Camera #n | Digital IO” on page 261
“Device Settings | Camera #n | Serial Port” on page 264
“Device Settings | Camera #n | Ethernet” on page 267
“Device Settings | Camera #n | Logging” on page 270