SETTING UP THE DM3610 DIMENSIONER
PRODUCT REFERENCE GUIDE
377
6. Click Update to save the changes.
7. Test the system by inducting a series of application objects and bar codes. Use the
AV7000 imaging utility to verify that the cameras are focusing properly over the
width and height of the conveyor.
8. Under Ta
chometer, select Hardware/External from the Tach Source drop-down
list.
9. Click Upda
te.
Adjusting Height Offset
When working with a DC3000 multi-head based Dimensioning system, the
text box must intercept all dimensioning lines.
To Next Page
Loading...
Need help?
General
