Datalogic AV7000 User Manual

APPENDIX A
448 AV7000 LINEAR CAMERA
If this logic is not implemented correctly the Input data registers “Bar Code Data” will
contain the data from the first read cycle after the reader boots. The Not Equal To
instruction check for new data to bar code data must be available. When new data is
available (output register is not equal to input) the rung is executed.
The Copy File instruction copies the bar code data to a program tag. Note that in this
example the instruction moves a fixed 10 registers (10 registers will contain 20 ASCII
characters).
The Mov
e instruction moves the sequence number from the input registers to the out-
put register. This lets the reader know the PL
C is ready for the data from the next read
cycle.
On-Demand Messaging (ControlLogix)
On-Demand messaging provides another option for transferring bar code data to your
ControlLogix processor. With on-demand messaging, the data transfer occurs as soon as
the bar code data is available, not as the result of constant messaging at a scheduled
interval.
For On-Demand messaging follow these steps:
1. To enable the camera, select the check-box Enable ControlLogix On-Demand
Messaging
from the Ethernet/IP page within e-Genius.

Datalogic AV7000 Specifications

General

Brand	Datalogic
Model	AV7000
Category	Digital Camera
Language	English