FOCUSING SETUP AND CALIBRATION
362
AV7000 LINEAR CAMERA
AS1 AREAscan™
The AS1 area sensors represent the ideal solution for the detection of very small
objects, even when passing in different positions inside the controlled height and width.
They can also help avoid multiple triggers on irregular shaped packages.
DL Light Curtain (LCC-75xx AV7 Light Curtain)
The DL Light Curtain is used to detect the presence of objects as they enter the scan-
ning area, as well as report the package heights ranging from 150 to 2500mm to the
AV7000.
STI Light Curtain
The STI Light Curtain is a legacy light curtain device that also detects the presence and
package heights of objects as they enter the scanning area.
S-85 Positioning Sensor (DK-502 Kit)
The S85 distance sensor with laser emission provides time of flight measurement
between the S85 and an object located between it and the calibrated far distance.
DM3610 Dimensioner
The DM3610 Dimensioner is used to detect the presence of products and report the
package position, heights and sequence number to all cameras in the system as parcels
enter the scanning area.
RangeFinder
The RangeFinder can be used to detect the presence of products as they enter the
scanning area as well as report the package positions/heights and sequence number to
all cameras in the system. RangeFinders used in dimensioning are calibrated to have an
accuracy of 2.5 mm [0.1 in], 5 mm [0.2 in] or 13 mm [0.5 in].
To Next Page
Loading...
Need help?
General
