COMPLIANCE
PRODUCT REFERENCE GUIDE
xix
quency energy and, if not installed and used in accordance with the instruction manual,
may cause harmful interference to radio communications. Operation of this equipment
in a residential area is likely to cause harmful interference in which case the user will be
required to correct the interference at his/her own expense.
UL Listing
CE Compliance
CE marking states the compliance of the product with essential requirements listed in
the applicable European directive. Since the directives and applicable standards are
subject to continuous updates, and since Datalogic promptly adopts these updates,
therefore the EU declaration of conformity is a living document. The EU declaration of
conformity is available for competent authorities and customers through Datalogic
commercial reference contacts. Since April 20th, 2016 the main European directives
applicable to Datalogic products require inclusion of an adequate analysis and assess-
ment of the risk(s). This evaluation was carried out in r
elation to the applicable points of
the standards listed in the Declaration of Conformity. Datalogic products are mainly
designed for integration purposes into more complex systems. For this reason it is under
the responsibility of the system integrator to do a new risk assessment regarding the
final installation.
Bureau Of Indian Standards (BIS)
Self Declaration – Conforming to IS 13252 (Part 1):2010, R-41009288
WARNING: This is a Class A product. In a domestic environment this prod-
uct may cause radio interference in which case the user may be required to
take adequate measures.
To Next Page
Loading...
Need help?
General
