E-GENIUS
224
AV7000 LINEAR CAMERA
TIME SYNCHRONIZATION
Use Time Synchronization to synchronize system time between the system devices.
Time must be synchronized for accurate tracking and logging. This feature allows all
units within an organization to have the same time stamp. For example, product located
on the west coast can have the message stamped with east coast time. It synchronizes
equipment with a company’s central PC.
To view and edit Time Synchronization settings:
1. In the menu tree under Modify Settings, navigate to Global Settings | Time Syn-
chronization. The Time Synchronization window opens.
2. Enter the appropriate information in the form as described below:
Time Servers
Simple Network Time Protocol (SNTP) Server Address N
Enter the IP address for the servers you wish to synchronize.
Device on WAN (Host Network)
Select None or the camera name from the drop-down list of the camera whose host network is
connected to the network with the time server. All the devices in the system will synchronize to
this selected device.
3. When you have finished making changes, click Update to save or click Reset to
revert to the previously saved values.
To Next Page
Loading...
Need help?
General
