406
AV7000 LINEAR CAMERA
CHAPTER 8
MAINTENANCE
OVERVIEW
This chapter provides instructions for maintaining optimal performance and life for your
AV7000 cameras. It provides specific information on:
• Maintenance Procedures
• Exterior Cleaning
• Mounting Hardware Checks
• Wiring Connection Checks
Item Description
Soft-bristle brush For cleaning the unit’s exterior
Clean, soft cloths For cleaning the unit’s exterior
Cleaning solutions
Mild detergent solution for cleaning the unit’s exterior. 70%
d
enatured alcohol, 30% de-ionized water solution for cleaning
Soft cotton swabs or ï€ Use to clean illumination exit window
RECOMMENDED MAINTENANCE FREQUENCY
The AV7000 Camera Barcode Reading System is designed for industrial environments.
The recommended frequency for performing these maintenance tasks will depend on
the application’s environment. In general, these procedures are recommended only if it
NOTE: Due to the complex and application
-specific nature of these installa-
tions, AV7000 camera systems must be setup and serviced by authorized
technicians trained by Datalogic.
The maintenance procedures in this chapter may be performed by an end
user technician. Training is recommended if the end user intends to do
more than the maintenance procedures provided in this chapter.
THERE ARE NO USER SERVICEABLE PARTS WITHIN THE AV7000.
DO NOT OPEN THE UNIT. OPENING THE AV7000 MAY VOID ITS WARRANTY.
CAUTION: Proceeding with any setup, calibration, or service procedures
without proper training may void the warranty.
For further information on training, contact us through our website at
www.datalogic.com.
To Next Page
Loading...
Need help?
General
