MANUAL MOUNTING CALIBRATION
PRODUCT REFERENCE GUIDE
257
5. If there is a problem reading any of the barcodes, run the Image Viewer to view
the codes. The barcodes used should reflect a sampling of the various codes to be
read by the system.
• Variation in contrast
• Variation in barcode’s X dimensions
6. Make sure all the barcodes are read successfully. 0.
Other Camera Checks
Confirm communication with host.
• Serial (if applicable)
• Ethernet (if applicable)
• Confirm Protocol Index (if applicable)
Observe the System in Action.
Confirm that all cameras are reading the barcode correctly and that the scan point is
communicating to the host.
To Next Page
Loading...
