ENCODER (TACHOMETER)
PRODUCT REFERENCE GUIDE
19
PGD100 NON-CONTACT SPEED DETECTOR
The PGD100 is a non-contact position measurement device, or Speed Detector, consist-
ing of a Controller and Sensor Array(s). It is
used in cases where a traditional contact
encoder/tachometer will not work, as in a
Cross-Belt Sorters or Tilt-Tray system
where a continuous belt surface is not available. The speed detector is designed to func-
tion as an encoder/tachometer replacement in certified dimensioning and scanning
applic
ations.
For information on installing and wiring the PGD100, see the PGD100 Non-Contact
Speed Detector Installation Manual
at www.datalogic.com.
To Next Page
Loading...
