Datalogic AV7000 User Manual

MAINTENANCE TASKS
PRODUCT REFERENCE GUIDE 411
Cleaning the Tachometer
If your application uses the tachometer option for tracking purposes, be sure to clean
the tachometer wheels periodically as outlined below.
1. Turn off the product transport.
2. Turn off the barcode reader by disconnecting the power source.
3. Using a clean, soft cloth, wipe the whe
els of the tachometer clean using a mild
detergent solution.
4. Before restarting the system, be sure the tachometer is making good contact with
th
e product transport.
5. Verify tachometer operation.
Tighten Mounting Hardware
1. Check all AV7000, Deflection Mirrors, CBX connection boxes, and power supply
mounting hardware as applicable. Tighten as necessary. Do not over-tighten. Be
sure not to disturb the equipment’s alignment as it relates to the product trans-
port.
2. Check the mounting hardware of the Photoelectric Sensor (if this option is being
used). Tig
hten as necessary. Do not over-tighten.
3. Check the mounting hardware of the tachometer (if this option is being used).
Tig
hten as necessary. Do not over-tighten.
Checking Barcode Reading System Connections
This is a safety check recommended for harsh environments where vibration may be a
problem. (See “Electrical Installation” on page 49.)
1. Check all wiring connections to the camera and illumination connector panels.
Tig
hten any loose connections as necessary. Do not over-tighten.
2. Check all wiring connections to the CBX connection box. Tighten any loose connec-
tions as necessary. Do not over-tighten.

Datalogic AV7000 Specifications

General

Brand	Datalogic
Model	AV7000
Category	Digital Camera
Language	English