ELECTRICAL INSTALLATION
56
AV7000 LINEAR CAMERA
AV7000/AI7000 CONNECTOR PANELS
After completing mechanical installation, use this section to properly wire your cameras
for optimal performance in your application. AV7000 wiring connections are made to
the connector panel and through the CBX connection box (via the I/O port). In most
applications, the cable connections to the barcode reader will include:
AI7000 Illumination
1. POWER IN – Main DC power connection for AV7000/AI7000 assembly
2. POWER OUT – Supplies DC power via cable to POWER connector on AV7000
3. FANS – Supplies DC power to AI7000 illumination fan units
AV7000 Camera
4. FAN – Supplies DC power to AV7000 fan unit
5. I/O – Provides connection to CBX Connection Box
6. FOCUS SER – Provides serial focus data to the camera (ex. light curtain, S85)
7. POWER – Connector receiving power from AI7000 POWER OUT
8. USB1 – OPTIONAL USB Keyboard and Mouse connection
9. VGA – OPTIONAL Monitor connector
10. HOST NET – Configuration and dimensioning data from the DM3610 if used
11. IMAGE NET – Configuration, Remote Monitor application, or image export
12. SYNC IN – AV7000 internal data, device network
13. SYNC OUT – AV7000 internal data, device network
14. FOCUS NET – Network focus data (RangeFinder)
To Next Page
Loading...
Need help?
General
