E-GENIUS
294
AV7000 LINEAR CAMERA
Barcodes In means a decode is placed on a package.
Barcodes Out means a decode is not placed on any package.
Barcodes Uncertain means it is uncertain which package the decode belongs to (e.g.
two packages are too close).
Total number of barcodes found that intersect more than one
pack, and are therefore ambiguous. A barcode was read but couldn’t be assigned to a package.
Possible reasons:
•Package spacing is too small and the code can be placed on more than one package.
•Verify Package Detection Settings
•Adjust advanced Packtrack settings
•Re-PackTrack camera
•Poor Triggering Creating packages that are smaller than the actually are. Fix trigger or use
package extends
Barcodes Not Decodable means the barcode could not be decoded.
6. Select a
down sampling number from the drop-down list. Choose a lower number
to see a fuller resolution of the image. Choose a higher number to view an image
during operation.
7. Click Stop to cease capturing images.
8. Click
Fit to Screen to zoom the image to fill the view window.
9. Controls:
•Click an image multiple times to zoom in.
•Hold <
SHIFT> and click an image multiple times to zoom out.
•Roll the mouse wheel to zoom in or out.
•Click, hold and slide to pan an image.
WARNING: Contact Datalogic Tech Support before making any calibration
adjustments.
NOTE: The White Level field displays the image white level based on where
the cursor
is positioned. The X,Y values field displays the cursor coordinates.
WARNING: Do not use down-sampling numbers lower than 16 when view-
ing
images during live sort. It will increase the processing time of the cam-
era and could cause no reads.
To Next Page
Loading...
Need help?
General
