Pro Tools Reference Guide134
The Input Path selector allows you to route any
audio input or any of the Pro Tools internal bus-
ses to an audio track or an Auxiliary Input track.
The choices available in this pop-up menu are
determined by the I/O Setup configuration. In-
puts in use by another track appear as bold in
the selector.
To remove an input assignment:
■ Select No Input from the Input Path selector.
Assigning Audio Track Outputs
(Audio Tracks, Auxiliary Inputs, Instrument
Tracks, Master Faders)
To assign an audio track output:
1 In order to assign audio track outputs in the
Edit window, select View > Edit Window > I/O.
2 In the Mix or Edit window, click the track’s
Output Path selector and choose from the avail-
able audio interface channels and busses. Stereo
and multichannel surround tracks have outputs
available as pairs and multichannel paths.
The Output Path selector lets you route a track
to any configured audio output or internal bus.
The choices available in this pop-up menu are
determined by the I/O Setup configuration.
Outputs in use by another track appear as bold
in the selector.
‘
Input Path selector
Output Path selector
To Next Page
Loading...