Pro Tools Reference Guide610
Real-Time Properties Settings
Quantize
Quantize either can be based on a grid or a
groove template. For grid quantize, additional
tuplet and grid offset settings are available in ad-
dition to the standard MIDI quantize properties.
For groove quantize, additional controls are pro-
vided to set the extent to which the groove’s du-
ration and velocities are applied. Both grid and
groove quantize also let you set a strength
amount, an “include” range, and a randomize
amount.
Quantize Pop-Up Menu Select the desired quan-
tize value, including all standard note rhythm
values between whole notes and 64th notes, in-
cluding dotted and triplet options. This pop-up
menu also provides access to all standard and
custom groove templates.
Swing Value Enter the desired amount of swing
as a percentage between 0 and 300%.
Tuplet Value Enable Tuplet and enter the ratio
for the tuplet (1–99), such as 3 to 2 or 5 to 4. Tu-
plet is only available in the expanded Real-Time
Properties window.
Offset Value Enable Offset and enter the desired
offset value in Ticks between –2000 and 2000.
Offset is only available in the expanded Real-
Time Properties window.
Strength Value Enable Strength and enter the
amount as a percentage between 0 and 100%.
Strength is only available in the expanded Real-
Time Properties window.
Include Enable Include and enter the range be-
tween 0 and 100%. Include is only available in
the expanded Real-Time Properties window.
Random Enable Random and enter a percentage
between 0 and 100%. Random is only available
in the expanded Real-Time Properties window.
Duration
Duration can be used to increase or decrease the
duration of MIDI notes by a fixed amount or by
a percentage. This is useful for creating legato or
staccato passages.
Duration Mode Pop-Up Menu
Select one of the following options from the Du-
ration Mode pop-up menu: Set, Add, Subtract,
Scale, Legato/Gap, or Legato/Overlap.
Set Select to set notes to the specified duration.
Selecting a Grid Quantize value or a Groove Template
Selecting a Duration mode
To Next Page
Loading...
Need help?
General
