Chapter 30: Automation 741
The composite Volume level and Mute state are
coalesced to each of the slave tracks. The VCA
Master Volume fader is reset to zero, the VCA
Mute is set to unmuted, and any automation on
the VCA Master is cleared.
Deleting the VCA Master
You can temporarily use a VCA Master to write
grouped automation, then coalesce the VCA au-
tomation to all of the slave tracks by deleting
the VCA Master. The coalesced tracks will play
back exactly as they did when they were in the
VCA group.
To coalesce automation from a VCA Master to all
of its slave tracks and delete the VCA Master
track:
1 Select the VCA Master track whose automa-
tion you want to coalesce.
2 Choose Track > Delete.
The composite Volume level and Mute state are
committed to each of the slave tracks.
Removing a Slave Track from a VCA
Group
You can remove an individual slave track from a
VCA group, which commits the VCA automa-
tion to that track, leaving the VCA Master and
the other slave tracks untouched. The coalesced
slave track plays back exactly as it did when it
was in the VCA group.
To coalesce automation from a VCA Master to an
individual slave track:
1 Do one of the following:
• Choose Modify Groups from the Group
List pop-up menu.
• Click the Group ID indicator on the track
and choose Modify from the pop-up menu.
• Right-click the Group name in the Group
List and choose Modify from the pop-up
menu.
2 In the Groups dialog, select the VCA-con-
trolled group that includes the slave track.
3 In the Groups dialog, click Tracks and remove
the slave track from the group.
4 Click OK.
The slave track is removed from the VCA group,
and the composite Volume level and Mute state
are coalesced to the track.
This action cannot be undone.
To Next Page
Loading...
Need help?
General
