HP DesignJet Z2100

Designjet Z Series — Service Manual 3-35
Service Tests (Diagnostics)
11 The Media Lever sensor test starts and the Front Panel prompts you to raise
the Media Lever:
12 Raise the Media Lever.
13 Press any key to continue.
14 The Media Lever sensor test continues and the Front Panel prompts you to
lower the Media Lever:
15 Lower the Media Lever.
16 Press any key to continue.
17 The Media sensor test starts and the Front Panel prompts you load media:
18 Raise the Media Lever.
19 Load media.
20 Lower the Media Lever.
21 Press any key to continue.
22 The Media sensor test continues and the Front Panel prompts to remove
media:
23 Raise the Media Lever.
24 Unload the media.
25 Lower the Media Lever.