Table 90: Tools and Parts Required for Component
Replacement (continued)
Tool or PartComponents
Flat-blade (–) screwdriverSerial cable to AUXILIARY or CONSOLE Routing
Engine port
Phillips (+) screwdrivers, numbers 1 and 2
Electrostatic bag or antistatic mat
Blank panel (if component is not reinstalled)
Standard SIB or T640-SIB
Phillips (+) screwdrivers, numbers 1 and 2SCG
Related
Documentation
• T640 Chassis Description on page 15
• Returning a Hardware Component to Juniper Networks, Inc. on page 493
Copyright © 2017, Juniper Networks, Inc.264
T640 Core Router Hardware Guide
To Next Page
Loading...
