April 30, 2013
• Added ADF paper feed service check and ADF maintenance kit.
• Updated the warning statement in the System card assembly removal topic. Added the same warning to
the Operator panel assembly removal and the Operator panel door assembly removal.
February 28, 2012
• Added error code “907.00” in the 9yy error code table.
February 2, 2012
• Added PN 40X6932 for the tray size sensing actuators.
• Added United Kingdom in the description for PN 40X0271.
November 22, 2011
• Updated the possible repair action for the following error codes:
– 200.34
– 929.01
– 929.02
– 929.03
October 25, 2011
• Replaced PN 40X4310 with PN 40X8310 for the HCIT media out actuator.
September 1, 2011
• Replaced PN 40X4365 with PN 40X6994 for the MPF pick solenoid assembly.
July 14, 2011
• Replaced PN 40X4473 with PN 99A0447 for the 550 option draft shaft.
• Added PN 99A0275 for the spring.
• Updated the art for Assembly 15 in the Parts catalog chapter.
• Replaced PN 40X4473 with PN 99A0447 for the 550 option draft shaft in Assembly 17 table in the Parts
catalog chapter.
• Added PN 99A0275 for the spring in the Assembly 17 table in the Parts catalog chapter.
• Updated the art for Assembly 17 in the Parts catalog chapter.
July 8, 2011
• Replaced PN 40X4309 with PN 40X5840 in Assembly 16 table in the Parts catalog chapter.
• Changed the model for the 7462‑0A5 machine type to X652de from X652dte under General Information
and parts catalog chapters.
7462
Preface
29
To Next Page
Loading...
