Lexmark 7462 series - Page 91

Error code Description Action
202.82 Sensor (fuser output) lingering jam (type 2 fuser
and fuser page count exceeded life)
Media reached the sensor (fuser output), but did
not clear it in the
specified
time.
Go to
“Sensor (fuser output) lingering jam
service check” on page 94
202.84 Sensor (fuser output) lingering jam (type 2 fuser
and fuser page count exceeded life)
Media reached the sensor (fuser output), but did
not clear it in the specified time.
202.85 Sensor (fuser output) lingering jam (type 2 fuser,
destination is output option, and fuser page count
exceeded life)
Media reached the sensor (fuser output), but did
not clear it in the
specified
time, and did not reach
the sensor (narrow media).
202.86 Sensor (fuser output) lingering jam (type 2 fuser,
destination is standard bin, and fuser page count
exceeded life)
Media reached the sensor (fuser output), but did
not clear it in the
specified
time, and also reached
the sensor (narrow media).
202.87 Sensor (fuser output) lingering jam (type 2 fuser,
destination is output option, and fuser page count
exceeded life)
Media reached the sensor (fuser output), but did
not clear it in the
specified
time, and also reached
the sensor (narrow media).
202.88 Sensor (fuser output) static jam and sensor
(narrow media) static jam (type 2 fuser and fuser
page count exceeded life)
Media remains on the sensor (fuser output) and
the sensor (narrow media) during the warm‑up
sequence.
Go to
“Paper jam around fuser exit or redrive
area service check” on page 92
202.99 Fuser ID chip failure
The system does not recognize the ID chip on the
fuser unit.
Go to
“Fuser unit assembly removal” on
page 373
7462
Diagnostic information
91