214323 16 Revision A
• Disengage header drive, put transmission in Neutral, and wait for all movement to stop before leaving
operator’s position.
• Stop the engine and remove the key from ignition before servicing, adjusting, lubricating, cleaning, or
unplugging machine.
• Engage safety props to prevent lowering of raised unit before servicing in the raised position.
• Use slow moving vehicle emblem and flashing warning lights when operating on roadways unless prohibited
by law.
Figure 1.33: MD #184422
MD #184422
Keep shields in place hazard
WARNING
• Do not place hand.
• To avoid injury, stop the engine and remove the key
before opening power drive system shield.
• Keep all shields in place.
Figure 1.34: MD #190546
MD #190546
Slippery surface
WARNING
• Do not use this area as a step or platform.
• Failure to comply could result in serious injury or death.
SAFETY
To Next Page
Loading...
