MacDon FD75 - New Holland Combines; Attaching Header to New Holland CR;CX Combine

214323 301 Revision A
4.6 New Holland Combines
4.6.1 Attaching Header to New Holland CR/CX Combine
DANGER
To avoid bodily injury or death from unexpected start-up of machine, always stop engine and remove key
from ignition before leaving operator’s seat for any reason.
1001498
B
A
Figure 4.74: Feeder House Locks
1. Ensure handle (A) is positioned so hooks (B) can
engage CA25 adapter.
1001144
A
B
Figure 4.75: Header on Combine
CAUTION
Never start or move the machine until you are sure all
bystanders have cleared the area.
2. Start engine and slowly drive combine up to CA25 until
feeder house saddle (A) is directly under CA25 top
cross member (B).
3. Raise feeder house slightly to lift header ensuring
feeder saddle is properly engaged in CA25 frame.
4. Stop engine and remove key from ignition.
HEADER ATTACHMENT/DETACHMENT