MacDon FD75 - Cutterbar; Cutterbar Wearplate; Knifehead Shield; Stub Guard Conversion Kit

214323 482 Revision A
6.3 Cutterbar
6.3.1 Cutterbar Wearplate
1004324
Figure 6.6: Cutterbar Wearplates
Cutterbar wearplates are recommended for cutting on the
ground when the soil is adhering to the steel.
Installation instructions are included in the kit.
Order one of the following bundles according to your
header size:
• 30 foot – MD #B4839
• 35 foot – MD #B4840
• 40 foot – MD #B4841
• 45 foot – MD #B5114
6.3.2 Knifehead Shield
1001240
Figure 6.7: Knifehead Shield
Knifehead shields attach to the endsheets and reduce the
knifehead opening to prevent cut crop, particularly severely
lodged crop, from accumulating over the knifehead and
damaging the knife drive box and endsheet.
Installation instructions are included in the kit.
Order the following bundles according to your header size
and guard type:
Regular Guards
• 30 foot and larger – MD #220101
Stub Guards
• 30 foot and larger – MD #220103
6.3.3 Stub Guard Conversion Kit
1001244
Figure 6.8: Stub Guards
Stub guards, complete with top guides and adjuster shoes,
are designed to cut tough crops.
Installation and adjustment instructions are included in
the kit.
Order one of the following bundles according to your
header size:
• 30 foot – MD #B5012
• 35 foot – MD #B5013
OPTIONS AND ATTACHMENTS