MacDon FD75 - Maintenance Schedule;Record

214323 324 Revision A
5.3.1 Maintenance Schedule/Record
Copy this page to continue record.
Maintenance
Record
Action:
üü - Check
SS - Lubricate ▲▲ - Change
Hour Meter Reading
Date
Serviced by
First Use, refer to 5.3.2 Break-In Inspection, page 326
End of Season, refer to 5.3.4 End-of-Season Service, page 327
10 Hours or Daily
38
ü
Hydraulic hoses and
lines
39
ü
Auger drive chain tension
ü
Knife sections, guards,
and hold-downs
39
ü
Tire pressure
39
S
Knife (except in sandy
conditions)
39
25 Hours
ü
Hydraulic oil level at
reservoir
39
S
Knifehead(s)
39
50 Hours
ü
Draper roller bearings
S
Driveline and driveline
universals
▲
Knife drive box oil - first 50
hours only
100 Hours or Annually
38
ü
Auger to pan and feed
draper clearance
ü
Draper seal
ü
Gearbox lubricant level
ü
Reel drive chain tension
ü
Reel tine/cutterbar
clearance
MAINTENANCE AND SERVICING
38. Whichever occurs first.
39. A record of daily maintenance is not required, but is at the Owner’s/Operator’s discretion.