EasyManua.ls Logo

MacDon M1240 - Break-In Inspection Procedures; Tightening Drive Wheel Nuts

MacDon M1240
614 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
215916 262 Revision A
Double Windrow Attachment Deck Position
1015169
A
B
Figure 4.342: GSL
1016066
A
B
Figure 4.343: Operators Console Draper Controls
1. Raise and lower the Double Windrow Attachment (DWA)
deck with REEL UP (A) and REEL DOWN (B) switches on
ground speed lever (GSL), or on the operators console.
NOTE:
This can also be done with the One-Touch-Return. For
instructions, refer to One-Touch-Return Buttons (A, B, C),
page 74.
Double Windrow Attachment Conveyor Speed
1014968
A
B
Figure 4.344: Operators Console
The Double Windrow Attachment (DWA) conveyor speed is
adjustable from the operators console. Press button (A) to
increase the speed or button (B) to decrease the speed.
NOTE:
When the DWA is attached, the conveyor speed adjustment
buttons also control header draper speeds.
OPERATION

Table of Contents

Other manuals for MacDon M1240

Related product manuals