MacDon M1240 - Checking Engine Coolant Level; Hoses and Lines

215916 274 Revision A
1019559
A
Figure 4.369: GSL
8. Use reel speed switches (A) on GSL to set reel speed. The
desired speed increases 1 rpm (or 0.1 mph or 0.2 km/h) per
momentary press, or continuous scrolling if switch is
pressed and held.
Adjusting Reel Alarm Pressure
Adjusting the reel alarm allows the Operator to set an alert to inform them that the reel is operating above the desired
pressure. A lower setting will cause the alarm to be set off more often; a higher setting will allow the alarm to be set off
less frequently. This adjustment requires the header to be in operation.
1019554
A
Figure 4.370: Header Run Screen 1
1. If RUN SCREEN 1 is not already displayed, press soft key
1 (A) on the Harvest Performance Tracker (HPT) to display
draper RUN SCREEN 1.
1019523
A
B
Figure 4.371: HPT Scroll Knob and GSL Select Button
2. Press scroll knob (A) on the Harvest Performance Tracker
(HPT) or SELECT button (B) on the ground speed lever (GSL)
to display the QuickMenu system.
OPERATION