MacDon M1240 - Tensioning Air Conditioner Compressor Belts; Changing Engine Gearbox Lubricant

215916 264 Revision A
4.5.8 Adjusting Header Raise and Lower Rates
The header raise and lower rates control how fast a header is raised or lowered. Adjust the speed if it is not satisfactory.
1016140
A
B
C
Figure 4.347: Opening the Main Menu
1. On the Harvest Performance Tracker (HPT) press soft
key 5 (A) to display the menu.
2. Use HPT scroll knob (B) to place the red cursor over
SETTINGS icon (C), and press knob (B) to select.
NOTE:
In addition to the HPT scroll knob (B), the scroll wheel on
the ground speed lever (not shown) can be used to
highlight and select items on the HPT display.
1037231
A
Figure 4.348: Header Settings Icon
3. Use the HPT scroll knob to move the red cursor to HEADER
SETTINGS icon (A).
1037232
A
B
Figure 4.349: Set-Up Header Menu List
4. Press the HPT scroll knob. HEADER SETUP page (A) appears.
NOTE:
The F4 shortcut button on the operator’s console also will
display the HEADER SETUP page.
5. Scroll to RAISE LOWER RATES (B), and press SELECT. A
menu for adjusting header lower/raise rates opens with the
last header setting as the default starting point.
OPERATION