MacDon M1240 - Calibrating Header Position Sensors on Harvest Performance Tracker Display

215916 185 Revision A
1012700
A
Figure 4.160: Left Cab-Forward Platform
3. Pull platform (A) towards the cab until it stops and the latch
is engaged.
1019603
A
Figure 4.161: Hose Support Attachment
4. Attach hose support (A) to the frame near the windrower
left cab-forward leg, and route the hoses under the frame.
NOTE:
Route the hydraulic hoses as straight as possible, and avoid
rub/wear points that could cause damage.
OPERATION