215916 97 Revision A
5. Scroll through the available options, and press SELECT to reset to default. Refer to the following list for factory default
options:
• Select all
• Display brightness
• Keypad brightness by day
• Display volume
• Language (English)
• Units (USA)
• Eco engine control speed (4 and 6 cylinders have different speeds)
• Max cab-forward speed 14 mph
• Max engine-forward speed 27 mph
• Header speed settings
• Header alarm pressures
• Knife alarm speed
• Manual (not auto) knife speed mode
• Manual (not auto) reel speed mode
• Manual (not auto) draper speed mode
• All functions unlocked
• All sensors enabled
• Cut width
• Swath roller selection off
• Max header raise/lower rates
• One-touch-return presets (reset to default option available also within this menu)
• DWA speed
• DWA alarm pressure
6. Press the HOME or BACK button. The CONFIRM YES/NO dialog box is displayed.
7. Select YES to save changes and close the dialog box, or select NO to close the dialog box without saving changes.
OPERATOR’S STATION
To Next Page
