MacDon M1240 - Priming Fuel System

215916 302 Revision A
1014578
A
B
Figure 4.433: HPT Scroll Knob and GSL Select Button
2. Press the scroll knob (A) on the Harvest Performance
Tracker (HPT) or the SELECT button (B) on the ground speed
lever (GSL) to display the QuickMenu system.
1023090
A
Figure 4.434: Auger Header QuickMenu Screen
3. Scroll to the KNIFE setting (A) on the QuickMenu screen,
and select it.
1015211
A
Figure 4.435: Knife Screen
4. Scroll to and select the KNIFE SPEED setting (A), displayed in
strokes per minute.
5. Adjust knife speed using the HPT scroll knob.
6. Press knob to select.
OPERATION