215916 305 Revision A
Figure 4.442: Knife Screen
4. Scroll to and select KNIFE SPEED ALARM setting (A),
displayed as a % of the preset knife speed.
5. Adjust the knife speed alarm % as desired. Default is 70%
and range is 50–90%.
4.7.3 Setting Float Options with Fixed Deck
When using an auger, the DECK SHIFT buttons can be used to store three different float settings. This is useful when cutting
in varying ground conditions, or when having one side lighter is desirable (such as cutting along wheel tracks or irrigation
borders).
DANGER
Ensure that all bystanders have cleared the area.
Figure 4.443: GSL
1. Start the engine and use HEADER TILT switches (A) and (B)
on the ground speed lever (GSL) to set header tilt to the
mid-range position.
OPERATION
To Next Page
Loading...
