215916 19 Revision A
Figure 1.34: MD #166454
MD #166454
General hazard pertaining to machine operation and servicing
DANGER
To prevent injury or death from improper or unsafe machine
operation:
• Read the operator’s manual and follow all safety
instructions.
• Do NOT allow untrained persons to operate the machine.
• Review these safety instructions with all Operators
every year.
• Ensure that all safety signs are installed and legible.
• Ensure that everyone is clear of the machine before starting
the engine and during its operation.
• Keep riders off the machine.
• Keep all shields in place and stay clear of moving parts.
• Disengage the header drive, put the transmission in Neutral,
and wait for all movement to stop before leaving the
operator’s position.
• Stop the engine and remove the key from the ignition
before servicing, adjusting, lubricating, cleaning, or
unplugging the machine.
• Engage the safety locks to prevent lowering of the header or
reel before servicing the header when it is in the raised
position.
• Use a slow-moving vehicle emblem and activate the
machine’s warning lights when operating on roadways,
unless these actions are prohibited by law.
SAFETY
To Next Page
Loading...
