ND-70348 (E) CHAPTER 4
Page 124
Revision 3.0
ASYD
SYSTEM
DATA
TYPE
(SYS)
SYSTEM
DATA
INDEX
(INDEX)
0 – 511
DATA
(DATA)
00 – FF
(Hex)
BIT
CORRESPONDING
DATA
SYSTEM DATA CONTENTS
DATA
0/1
BIT
1
94
b
0
Tenant Restriction Class Data
(“ATNR” command)
Separate or Common
Tenant Data table de-
velopment for the re-
spective commands
0/1 = Separate/Com-
mon
Note:
When data
“1” is as-
signed, data
must be as-
signed for
Tenant 1 (TN
= 1) in the re-
spective com-
mands.
b
1
EPN Facility Restriction Data
(“AEFR” command)
b
2
Primary Call Restriction Data
(“APCR” command)
b
3
Authorization Code Data
(“AATC” command)
b
4
Special Access Code for Floor
Data (“ASPF” command) (for
Hotel System)
b
5
Day/Night Connection Restric-
tion Data (“ADNR” command)
(for Hotel System)
b
6
Station to Station Connection
Restriction Data (“ASCR” com-
mand) (for Hotel System)
b
7
Special Incoming Data (“ASID”
command)
95
b
0
When billing data output failure
has occurred to SMDR/RS-
232C, the unit digit of the time
in which the billing data can be
saved; 0-9 (10-minute basis)
Data can be saved
from 10 to 990 min-
utes (16 hours) by
10-minute basis.
In the case of 00,
output billing data
can be saved for 3
hours.
In the case of FF,
output billing data
can be saved until
data output becomes
possible.
(Default is FF fixed)
b
1
b
2
b
3
b
4
When billing data output failure
has occurred to SMDR/RS-
232C, the tens digit of the time
in which the billing data can be
saved; 0-9 (10-minute basis)
b
5
b
6
b
7
To Next Page
Loading...
Need help?
General