ND-70348 (E) CHAPTER 4
Page 649
Revision 4.0
AIECL
AIECL: Assignment of IP Service Echo Canceler Data for LDM
1. General
This command is used to assign, modify, and delete the Echo Canceler data for IP services. This data is written
in the Local Data Memory (LDM).
2. Precautions
1. This command is valid when IPTRK service software is programmed.
2. If both “NODE” and “IPG” parameters are restricted, this command cannot be used.
3. This command is available for Release 9 software or later.
4. “IPG” parameter is available since Release 10 software enhancement.
To Next Page
Loading...
Need help?
General